Onkyo TX-SR608 Owner Manual - Page 56

Setting the Powered Zone 2 If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" (➔ 55), you must set the "Front High/Front Wide/Zone2" setting to "Zone2". Menu Speaker Setup 1 In the "Speaker Setup" menu, select "Speaker Settings", and then press ENTER. 2 Use R/X to select "Front High/Front Wide/Zone2" and F/S to select "Zone2". ` Zone2: Zone 2 speakers can be used (Powered Zone 2 enabled). Using Zone 2 This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the AV receiver ZONE 2 OFF - /+ Note • When "Zone2" is selected and Zone 2 turned on, the Zone 2 speakers connected to the FRONT HIGH OR FRONT WIDE OR ZONE 2 SPEAKERS L/R terminals output sound, but the surround back, front high or front wide speakers connected to the SURR BACK OR FRONT HIGH OR FRONT WIDE SPEAKERS L/R terminals do not. When "Zone2" is selected and Zone 2 turned off, the surround back, front high or front wide speakers output sound as normal. • When the "Front High/Front Wide/Zone2" setting is set to "Zone2" and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases. • Powered Zone 2 cannot be used if "Speakers Type" is set to "Bi-Amp" (➔ 41). ZONE 2 indicator Input selector buttons 1 To turn on Zone 2 and select an input source, press ZONE 2 followed by an input selector button within 8 seconds. Zone 2 turns on, the ZONE 2 indicator lights. To select AM or FM, press the TUNER input selector button repeatedly. (North American models) You can also select SIRIUS. To select the same source as that of the main room, press ZONE 2 repeatedly until "Z2 Selector: Source" appears on the display. Note • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. 2 To turn off Zone 2, press OFF. Note • While Powered Zone 2 is being used, listening modes that require surround back speakers or front high speakers or front wide speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, THX Select2 Cinema, Dolby Pro Logic IIz height, and Audyssey DSX™ are unavailable. • When the "Front High/Front Wide/Zone2" setting is set to "Zone2" and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases. En 56