Onkyo TX SR806 Owner Manual - Page 101
Setting the Zone2 Out, Fixed, Variable
UPC - 751398008238
View all Onkyo TX SR806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Zone 2-Continued Setting the Zone2 Out 4 If you've connected your Zone 2 speakers to an amp with no volume control, set the "Zone2 Out" setting, respec- tively, to "Variable" so that you can set the zone's vol- ume, balance, and tone on the AV receiver/AV amplifier. 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. Use the Up and Down [R]/[X] buttons to select "Zone2 Out", and use the Left and Right [F]/[S] buttons to select: Fixed: The Zone 2 volume must be set on the amp in that zone. Variable: The Zone 2 volume can be set on the AV receiver/AV amplifier. 5 Press the [SETUP] button. The setup menu closes. 2 Use the Up and Down [R]/[X] but- tons to select "7. Hardware Setup", and then press [ENTER]. The "Hardware Setup" menu appears. 7. Hardware Setup 1. Remote Control 2. Zone2 3. Tuner 4. Analog Multich 5. HDMI Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. 3 Use the Up and Down [R]/[X] but- tons to select "2. Zone2", and then press [ENTER]. The "Zone2" menu appears. 7-2. Zone2 Powered Zone2 Zone2 Out Not Act Fixed 101