Onkyo TX SR806 Owner Manual - Page 94
Analog Multich, SIRIUS Parental Lock, on North American model, Subwoofer Input Sensitivity
UPC - 751398008238
View all Onkyo TX SR806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Advanced Setup-Continued ■ SIRIUS Parental Lock (on North American model) This item is for use with SIRIUS Satellite Radio. It's not available if "SAT Radio Mode" is set to "None". See the separate Satellite Radio Guide for more information. Analog Multich ■ Subwoofer Input Sensitivity Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal. With this setting, you can change the AV receiver/AV amplifier's subwoofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the AV receiver/AV amplifier's DVD SUBWOOFER jack. You can select 0 dB, 5 dB, 10 dB, or 15 dB. If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting. HDMI ■ Monitor Out See "Monitor Setup" on page 41. ■ Output Resolution You can specify the output resolution for the HDMI outputs and have the AV receiver/AV amplifier upconvert the picture resolution as necessary to match the resolution supported by your TV. See the "Video Resolution Chart" on page 122 to see how the AV receiver/AV amplifier handles video input at different resolutions. Through: Select this to pass video through the AV receiver/AV amplifier at the same resolution and with no conversion (default). Auto: Select this to have the AV receiver/AV amplifier automatically convert video at resolutions not supported by your TV. (Not available when the "Monitor Out" setting is set to "Analog".) 480p (480/576p): Select this for 480p or 576p output and video conversion as necessary. 720p: Select this for 720p output and video conversion as necessary. 1080i: Select this for 1080i output and video conversion as necessary. 1080p: Select this for 1080p output and video conversion as necessary. (Not available when the "Monitor Out" setting is set to "Analog".) Note: For optimal video performance, THX recommends that the "Output Resolution" be set to "Through." ■ Zoom Mode This setting determines the aspect ratio. Auto: The AV receiver/AV amplifier automatically selects the Zoom Mode in accordance with the input signal (default). 94 Normal: Full: Zoom: Wide Zoom: