Onkyo TX-SV535 Owner Manual - Page 9

Video equipment connections • On each pair of input jacks, the lower jack (marked R: Red) corresponds to the right channel, and the upper jack (marked L: White) to the left channel. • Please refer to the instruction manual of each component when making any connections. Video disc player Monitor TV VIDEO OUT AUDIO OUT 000 VIDEO IN The IPM switch is normally set to OFF. 0 0 0 0 00 0 MONITOR .0„ 0 t 90000 **0000 OUT 8 -LF Interference may be caused between the TV and this unit. It this interference occurs, place this unit and the TV as far apart as possible. We do not recommend the use of a common TV/FM antenna (see antenna section). AUDIO IN VIDEO IN AUDIO OUT AUDIO IN VIDEO OUT - VIDEO OUT AUDIO OUT VIDEO IN GO= Video cassette recorder 0 0 Video cassette recorder IPM system: The receiver's power is automatically turned on when the TV is turned on. To use this function, connect the units as shown in the diagram. IPM ON O (TV) (VD P) -17 Set the IPM switch to ON. O 000 O 000 la fEl VIDEO OUT ) VIDEO IN O 41) 0 0 0 0 OUT IN 0, IN Fir7d 7 0 0 0 0 0 0 00 0 OF, AUDIO OUT NOTES: • This unit will automatically switch on approximately three to five seconds after the TV comes on. • The IPM function is not operating if the TV screen remains blank, even if the TV is swiched on. • In order to use the IPM function, the TX-SV535 should be connected to the video input terminal on the TV. 9