Optoma BE Free6 BEFree6 UserManual - Page 8

Remove both earbuds from the charging case and insert them in your ear, both earbuds will turn on automatically and connect to each other. You will hear voice prompt "Paired". Pairing BE Free6 earbuds with source device 1. When removing the Right earbud from the charging case, press and hold the BE Free6's Power/Function button for 4 seconds until the LED indicator light flashes orange and white or you hear voice prompt "Pairing mode activated". Your BE Free6 is now in pairing mode. 2. Turn on Bluetooth® on your source device, then select "BE Free6 R" once it appears on the device list. 3. Once successfully paired, the LED indicator will flash white and you hear "Device connected" from your BE Free6. Note: Please be aware of press and hold power/function button for 5 seconds will turn off the earbuds. Using your BE Free6 right and left earbuds in mono mode, by pairing to two different source devices: To use mono mode, you will need to pair the Left earbud with the first source device and then to pair right earbud with a second source device. 1. To pair the Left earbud with source device, pick up the Left earbud from the charging case, press and hold the left earpiece's Power/Function button for 4 seconds until the LED indicator light flashes orange and white or you hear voice prompt "Pairing mode activated". Your left earbud is now in pairing mode. 2. Turn on Bluetooth® on your source device and then select "BE Free6 L (Mono)" once it appears on the device list. 3. Once successfully paired, the LED indicator will flash white and you hear "Device connected" from your BE Free6. 4. To pair right earpiece with a second source device, repeat the above steps 1,2 and 3. On a Bluetooth enabled device, please select "BE Free6 R" on the device list. 8