Optoma UHZ65 UHZ65 User Manual - Page 30

USING THE PROJECTOR ‡‡ HDR Compatibility ±± The projector is compatible with HDR10 metadata. The projector does not support Dolby Vision HDR metadata. Brightness Adjust the brightness of the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Sharpness Adjust the sharpness of the image. Color Adjust a video image from black and white to fully saturated color. Tint Adjust the color balance of red and green. Gamma Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output. ‡‡ Film: For home theater. ‡‡ Video: For video or TV source. ‡‡ Graphics: For PC / Photo source. ‡‡ Standard(2.2): For standardized setting. ‡‡ 1.8 / 2.0 / 2.4: For specific PC / Photo source. ‡‡ 3D: For 3D source. Note: 3D gamma option is visible and available only for 3D sources. Color Settings Configure the color settings. ‡‡ BrilliantColorTM: This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while providing true, more vibrant colors in picture. ‡‡ Color Temperature: Select a color temperature from D55, D65, D75, D83, D93, or Native. ‡‡ Color Gamut: Select an appropriate color gamut from Native, HDTV, Presentation, Cinema, or Game. ‡‡ CMS (Color Management System): Select one of the colors (R/G/B/C/Y/M/W) to adjust its x/y offset and brightness. ±± Color: Select between red (R), green (G), blue (B), cyan (C), yellow (Y), magenta (M), and white (W) color. ±± x offset: Adjust the x offset value of the selected color. ±± y offset: Adjust the y offset value of the selected color. ±± Brightness: Adjust the brightness value of the selected color. ±± Reset: Return the factory default settings for color adjustments. ±± Exit: Exit the "CMS" menu. ‡‡ RGB Gain/Bias: This settings allows to configure the brightness (gain) and contrast (bias) of an image. 30 English