Optoma UHZ65 UHZ65 User Manual - Page 31

Color Space HDMI input only, DynamicBlack 1/ DynamicBlack 2/ DynamicBlack 3

Get Optoma UHZ65 PDF manuals and user guides View all Optoma UHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

USING THE PROJECTOR ±± Reset: Return the factory default settings for RGB gain/bias. ±± Exit: Exit the "RGB Gain/Bias" menu. ‡‡ Color Space (non-HDMI input only): Select an appropriate color matrix type from the following: AUTO, RGB, or YUV. ‡‡ Signal Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto, RGB(0-255), RGB(16-235), and YUV. Adjust the signal options. ‡‡ Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If automatic is disabled, the frequency and phase items will appear for tuning and saving the settings. ‡‡ Frequency: Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. ‡‡ Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. ‡‡ H. Position: Adjust the horizontal positioning of the image. ‡‡ V. Position: Adjust the vertical positioning of the image. ‡‡ Exit: Exit the "Signal" menu. Note: This menu is only available if the input source is RGB/Component. UltraDetail Adjust the edges of the projected image in order to provide more perceived details. Brightness Mode Adjust the brightness mode settings. ‡‡ DynamicBlack 1/ DynamicBlack 2/ DynamicBlack 3: Use to automatically adjust the picture brightness in order to give optimum contrast performance. ‡‡ Power: Choose the power percentage for brightness mode. PureEngine Adjust the PureEngine parameters. ‡‡ PureContrast: Use to automatically optimize the brightness of the display during dark / light movie scenes to be shown in incredible detail. ‡‡ PureColor: Use to significantly increase the image's vividness. ‡‡ PureMotion: Use to preserve a natural motion of the displayed image. ‡‡ PureMotion Demo: This feature enables you to see the difference in the image quality between the raw unprocessed image and the image processed as processed by the PureMotion. Use this mode to check the adjustments that you make to the PureMotion settings. Note: This menu is only available for certain models. Reset Return the factory default settings for color settings. English 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
English
31
USING THE PROJECTOR
±
Reset: Return the factory default settings for RGB gain/bias.
±
Exit: Exit the “RGB Gain/Bias” menu.
±
Color Space (non-HDMI input only)
: Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
±
Color Space (HDMI input only)
: select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Signal
Adjust the signal options.
±
Automatic
: Configure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
±
Frequency
: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to flicker vertically.
±
Phase
: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
±
H. Position
: Adjust the horizontal positioning of the image.
±
V. Position
: Adjust the vertical positioning of the image.
±
Exit
: Exit the “Signal” menu.
Note:
This menu is only available if the input source is RGB/Component.
UltraDetail
Adjust the edges of the projected image in order to provide more perceived details.
Brightness Mode
Adjust the brightness mode settings.
±
DynamicBlack 1/ DynamicBlack 2/ DynamicBlack 3
: Use to automatically adjust the picture
brightness in order to give optimum contrast performance.
±
Power
: Choose the power percentage for brightness mode.
PureEngine
Adjust the PureEngine parameters.
±
PureContrast
: Use to automatically optimize the brightness of the display during dark / light movie
scenes to be shown in incredible detail.
±
PureColor
: Use to significantly increase the image’s vividness.
±
PureMotion
: Use to preserve a natural motion of the displayed image.
±
PureMotion Demo
: This feature enables you to see the difference in the image quality between the
raw unprocessed image and the image processed as processed by the PureMotion. Use this mode to
check the adjustments that you make to the PureMotion settings.
Note:
This menu is only available for certain models.
Reset
Return the factory default settings for color settings.