Optoma UHZ65 UHZ65 User Manual - Page 32
Display 3D menu, Display aspect ratio menu, 3D Mode, 3D Sync Invert, Aspect Ratio, Superwide, Native
View all Optoma UHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
USING THE PROJECTOR Display 3D menu Note 3D Mode This projector is a 3D ready projector with DLP-Link 3D solution. Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video. This projector supports frame sequential (page-flip) 3D via HDMI1/HDMI2/VGA ports. To enable 3D mode, the input frame rate should be set to 60Hz only, lower or higher frame rate is not supported. To reach the best performance, resolution 1920x1080 is recommended, please be noted that 4K (3840x2160) resolution is not supported in 3D mode. Switch the 3D mode on or off. 3D Sync Invert Press the "On" to invert left and right frame contents. Press the "Off" for default frame contents. Display aspect ratio menu Aspect Ratio Select the aspect ratio of the displayed image between the following options: 4:3: This format is for 4:3 input sources. Note: 16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. LBX: This format is for non-16x9, letterbox source and if you use external 16x9 lens to display 2.35:1 aspect ratio in full resolution. Superwide: Use this special 2.0:1 aspect ratio to display both 16:9 and 2.35:1 aspect ratio movies without black bars at the top and bottom of the screen. Native: This format displays the original image without any scaling. Auto: Automatically selects the appropriate display format. Detailed informations about LBX mode: ±± Some Letter-Box Format DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look right when displaying image in 16:9 mode. In this situation, please try to use the 4:3 mode to view the DVD. If the content is not 4:3, there will be black bars around the image in 16:9 display. For this type of content, you can use LBX mode to fill the image on the 16:9 display. ±± If you use an external anamorphic lens, this LBX mode also allows you to watch a 2.35:1 content (include Anamorphic DVD and HDTV film source) that supports anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Light source power and vertical resolution are fully utilized. To use the superwide format, do the following: a) Set the screen aspect ratio to 2.0:1. b) Select "Superwide" format. c) Align the projector image correctly on the screen. 32 English