Optoma UHZ65 UHZ65 User Manual - Page 37
Network menu, Setup reset OSD menu
View all Optoma UHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
USING THE PROJECTOR Display Mode Lock Choose "On" or "Off" to lock or unlock adjusting display mode settings. Keypad Lock When the keypad lock function is "On", the Keypad will be locked. However, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the Keypad. Information Hide Enable this function to hide the information message. Off: Choose "On" to hide the info message. Logo On: Choose "Off" to show the "searching" message. Use this function to set the desired startup screen. If changes are made, they will take effect the next time the projector is powered on. Default: The default startup screen. Neutral: Logo is not displayed on startup screen. Background Color Use this function to display a blue, red, green, gray color, or none when no signal is available. HDMI 1 EQ Set the HDMI port EQ value for HDMI1. HDMI 2 EQ Set the HDMI port EQ value for HDMI2/MHL. Note: HDMI EQ analyses the signal data and eliminates distortion due to signal loss when using long HDMI cables. The HDMI receiver also includes a timing adjustment circuit that removes timing jitter, restoring the HDMI signal to optimal transmission levels. 3840x2160@60Hz suggests using the HDMI cable under 5 meters. 3840x2160@30Hz/25Hz/24Hz suggests using the HDMI cable under 15 meters. Setup reset OSD menu Reset OSD Return the factory default settings for OSD menu settings. Reset to Default Return the factory default settings for all settings. Network menu Network LAN menu Network Status Display the network connection status (read-only). MAC Address Display the MAC address (read-only). English 37