Optoma ZU1050 ZU1050 User Manual - Page 51
Direct Power On, Light Source Settings
View all Optoma ZU1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
USING THE PROJECTOR Power Settings Configure the power settings. Refer to page 51. Light Source Settings Configure the light source settings. Refer to "Light Source Settings menu" on page 52. Light Sensor Set the light sensor calibration option to "Default", "Auto", or "Manual". Default: Light sensor is calibrated at the cooling stage. Auto: Light sensor is calibrated every 168 hours. Manual: Calibrate the light sensor manually. Information Display the projector information for source, resolution, and software version on the screen. Factory Reset Restore all settings to their default value. It will not reset network. Power Settings menu DISPLAY OUTPUT Standby Power Mode Direct Power On Auto Power Off Sleep Timer Power Settings SETUP 0.5W mode Off 20 Mins No OPTION Standby Power Mode Set the standby power mode setting. 0.5W mode: The projector is in standby mode when connected to AC power. (