Panasonic AG DVC20 3 Ccd Dv Camcorder - Page 12

Inserting/removing a cassette, When the cassette holder does not come out - camera

Page 12 highlights

Before using Inserting/removing a cassette 1 Slide the [OPEN/EJECT] lever and open the cassette cover. ≥When the cover is fully opened, the cassette holder will come out. 2 After the cassette holder is opened, insert/remove the cassette. OPEN/ EJECT ª Inserting/removing the cassette ≥When the cassette holder is in action, do not touch anything except the [PUSH] mark. ≥When inserting a previously recorded cassette, use the blank search function to find the position where you want to continue recording. If you overwrite-record on a previously recorded cassette, be sure to find the position where you continue recording. ≥Close the cassette cover tightly. ≥When closing the cassette cover, do not get anything, such as a cable, caught in the cover. ª Accidental erasure prevention If the accidental erasure prevention slider 1 of a cassette is opened (slide in the direction of the [SAVE] arrow), the cassette cannot be recorded. When recording, close the accidental erasure prevention slider of the cassette (slide in the direction of the [REC] arrow). 1 R E C SAVE ≥When inserting a cassette, orient it as shown in the figure, and then securely insert it as far as it goes. ≥When removing, pull it straight out. 3 Push the [PUSH] mark 1 in order to close the cassette holder. 1 PUSH 4 Only after the cassette holder is completely housed, close the cassette cover. ≥After using, make sure to rewind the cassette completely, remove it, and put it in a case. Store the case in an upright position. (-38-) ≥When condensation is formed on the lens or the main unit of the camera-recorder, even if no condensation alarm is indicated, condensation may have formed on the heads or the cassette tape. Do not open the cassette cover. (-36-) ª When the cassette holder does not come out ≥Close the cassette cover completely, and then open it again completely. ≥Check if the battery has run down. ª When the cassette holder cannot be housed ≥Set the [OFF/ON] switch to [OFF], then to [ON] again. ≥Check if the battery has run down. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Before using
12
Inserting/removing a cassette
1
Slide the [OPEN/EJECT] lever and open the cassette
cover.
When the cover is fully opened, the cassette holder will come
out.
2
After the cassette holder is opened, insert/remove the
cassette.
When inserting a cassette, orient it as shown in the figure,
and then securely insert it as far as it goes.
When removing, pull it straight out.
3
Push the [PUSH] mark
1
in order to close the cassette
holder.
4
Only after the cassette holder is completely housed,
close the cassette cover.
After using, make sure to rewind the cassette completely,
remove it, and put it in a case. Store the case in an upright
position. (
-38-
)
When condensation is formed on the lens or the main unit of
the camera-recorder, even if no condensation alarm is
indicated, condensation may have formed on the heads or the
cassette tape. Do not open the cassette cover. (
-36-
)
ª
When the cassette holder does not come out
Close the cassette cover completely, and then open it again
completely.
Check if the battery has run down.
ª
When the cassette holder cannot be housed
Set the [OFF/ON] switch to [OFF], then to [ON] again.
Check if the battery has run down.
ª
Inserting/removing the cassette
When the cassette holder is in action, do not touch anything
except the [PUSH] mark.
When inserting a previously recorded cassette, use the blank
search function to find the position where you want to
continue recording. If you overwrite-record on a previously
recorded cassette, be sure to find the position where you
continue recording.
Close the cassette cover tightly.
When closing the cassette cover, do not get anything, such as
a cable, caught in the cover.
ª
Accidental erasure prevention
If the accidental erasure prevention slider
1
of a cassette is
opened (slide in the direction of the [SAVE] arrow), the cassette
cannot be recorded. When recording, close the accidental
erasure prevention slider of the cassette (slide in the direction
of the [REC] arrow).
OPEN/
EJECT
PUSH
1
1
R E C
SAVE