Panasonic AG DVC20 3 Ccd Dv Camcorder - Page 9
Lens cap and grip belt, Attaching the shoulder strap, Using the LCD monitor, Attach the lens cap - used
UPC - 791871302958
View all Panasonic AG DVC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Lens cap and grip belt ª Attach the lens cap To protect the lens surface, attach the lens cap. Before using Attaching the shoulder strap We recommend that you attach the shoulder strap before going out of doors to record so as to avoid dropping the camerarecorder. 1 Pull the end of the shoulder strap through the shoulder strap holder on the camera-recorder. ª Adjust the grip belt Adjust the length of the Grip Belt to the size of your hand. 1 Detach the tip of the grip belt. 2 Fold the tip of the shoulder strap, run it through the shoulder strap length adjuster, and pull it. 1 2 Adjust the length. 3 Reattach the grip belt. ≥Pull it out more than 2 cm 1 from the shoulder strap length adjuster so that it cannot slip off. Using the LCD monitor You can record the image while viewing it on the LCD monitor opened. 1 Press the [PUSH OPEN] button and, at the same time, bring the LCD Monitor out about 90o in the direction of the arrow. PUSH OPEN ≥The viewfinder will go off. 2 Adjust the angle of the LCD monitor as you prefer. 1 180o 2 90o ≥It can rotate up to 180o 1 towards the lens or 90o 2 towards the viewfinder. ≥The brightness and color level of the LCD monitor can be adjusted from the menu. ≥If it is forcibly opened or rotated, the camera may be damaged or fail. ≥When the LCD monitor is rotated by 180o towards the lens (when recording yourself), the LCD monitor and the viewfinder will be simultaneously activated. 9