Panasonic AKHRP200 AKHRP200 User Guide - Page 21
System (1/2), Hd Color Bar
View all Panasonic AKHRP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ROP menu setting (continued) Item LEVEL DEPENDENT DARK DETAIL Display 0 ׀ 5 % ׀ 30 % 0 ׀ 1 ׀ 5 Function Lowers the detail in dark areas. It adjusts the level. SYSTEM (1/2) Item RETURN1 RETURN2 RETURN3 RETURN4 RETURN · DELAY DOWN CONVERT MODE UP CONVERT MODE ( indicates factory default settings.) Display Function HD SDI1 HD SDI2 VBS Sets the input allocations of return signal 1. HD SDI1 HD SDI2 VBS Sets the input allocations of return signal 2. HD SDI1 HD SDI2 VBS Sets the input allocations of return signal 3. HD SDI1 HD SDI2 VBS Sets the input allocations of return signal 4. NORMAL SHORT Selects whether a RET display video will be delayed by 1 F (NORMAL) or by the shortest possible period (SHORT). SC Selects the down-conversion SQ system for video output from SD LB SDI and VBS. SC Selects the up-conversion SQ system for videos used as SD LB SDI and VBS return videos. Item HD COLOR BAR PATHO SDI3-4 OUT Display FULL BARS-1 ARIB BARS-2 BARS-3 BARS-4 BARS-5 BARS-6 OFF ON NORMAL PM Function Select the color bar signals to be output from the HD/SD SDI OUT connectors and VBS connector when "BAR" has been selected on the operation panel of the ROP. When they are output in VBS or SD format, color bars in HD format are output in the mode specified with DOWNCONVERT MODE. FULL: 75 % full field color bar BARS-1: Color bar based on the SMPTE standard ARIB: ARIB multi-format color bar BARS-2: Color bar based on the EIAJ standard BARS-3: Split field color bar BARS-4: 75 % full field color bar placed in an area with a 4:3 aspect ratio. (Displayed 40 % gray outside the area.) BARS-5: Color bar based on the SMPTE standard that is placed in an area with a 4:3 aspect ratio. (Displayed 40 % gray outside the area.) BARS-6: Color bar based on the EIAJ standard that is placed in an area with a 4:3 aspect ratio. (Displayed 40 % gray outside the area.) Select ON/OFF for the pathological signals. Selects the signals output from the 3rd and 4th HD/SD SDI signal output connectors on a CCU. 21