Panasonic AKHRP200 AKHRP200 User Guide - Page 8

Setup Mode Operations (continued) • To cancel loading, select [n] and press . • The file is loaded from the memory card and [Fin] appears when loading ends. • [E02] is displayed if the load operation from the memory card fails. (→page 13) If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1. • To exit setup mode, hold down for about 2 seconds. • To make other settings, press to select a menu number. 3 Saving user files to/loading user files from memory card Press to select menu number [3]. Select file number, Select y (Select)/ Save file indication n (Cancel) Load file indication UP ND CC SHT SYNC M.GAIN M.PED CAMERA 10-19 DATA SET IRIS DOWN DISPLAY SELECT SET UP ND/CC M.GAIN/M.PED SHUTTER SHIFT + UP+DOWN SAVE/LOAD EXIT EXECUTE No. SELECT Press to save/load Press to confirm Press to exit setup mode (hold down) Press to select the menu number 3-1 Save user file to memory card Current operating status data is saved as a user file to the memory card. 1. Press to select [ND]. • Each press of toggles between [ND] (Save) and [CC] (load). ND CC SHT SYNC M.GAIN M.PED • [E01] is displayed when a user file with the same name as the one you are attempting to save already exists on the memory card. To overwrite the file, press or to select [y] and press .(→page 13) • To exit setup mode, hold down for about 2 seconds. • To make other settings, press to select a menu number. 3-2 Load user file from memory card User file data loaded from the memory card is returned to the operating status. (It is not returned to user files 1 to 3. To return the data to user files 1 to 3, exit setup mode and store the data in one of user files 1 to 3. For details, refer to , the instruction manual.) 1. Press to select [CC]. • Each press of toggles between [ND] (Save) and [CC] (load). ND CC SHT SYNC M.GAIN M.PED IRIS 2. Press or to select a file number on the memory card and press to confirm the selection. ND CC SHT SYNC M.GAIN M.PED IRIS To load file no. 2 from the memory card 3. Press or to select [y] and press to confirm the selection. • Do not remove a memory card that is being accessed. ND CC SHT SYNC M.GAIN M.PED IRIS 2. Press or to select a file number on the memory card and press to confirm the selection. ND CC SHT SYNC M.GAIN M.PED IRIS To save a file to file no. 2 on the memory card 3. Press or to select [y] and press to confirm the selection. • Do not remove a memory card that is being accessed. ND CC SHT SYNC M.GAIN M.PED IRIS • To cancel loading, select [n] and press . • The file is loaded from the memory card and [Fin] appears when loading ends. • [E02] is displayed if the load operation from the memory card fails. (→page 13) If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1. • To exit setup mode, hold down for about 2 seconds. • To make other settings, press to select a menu number. IRIS • To cancel saving, select [n] and press . • The file is saved to the memory card and [Fin] appears when saving ends. • [E02] is displayed if the save operation to the memory card fails. (→page 13) If this happens, check the memory card and try again or insert another memory card to perform the operation again. 8