Panasonic AKHRP200 AKHRP200 User Guide - Page 22

ROP menu setting (continued) SYSTEM (2/2 ０ ０ ０Ｈ ６０dB ０dB ６０dB ０dB Item HD H PHASE SD H PHASE SD-HD V MIC1 GAIN ( indicates factory default settings.) Display Function -1099 ‫׀‬ 0 ‫׀‬ 1099 (59.94 Hz) Adjusts the horizontal phase of HD SDI video for the genlock reference phase. -1319 ‫׀‬ 0 ‫׀‬ 1319 (50Hz) -857 ‫׀‬ 0 ‫׀‬ 857 (59.94Hz) Adjusts SD horizontal sync phase. -863 ‫׀‬ 0 ‫׀‬ 863 (50Hz) 0H ADVANCE 0H_SD_DLAY Set the vertical phase of the HDTV output in relation to the SDTV output. 0H: Sets the vertical phase to the same phase. ADVANCE: When the field frequency is 59.94 Hz, the phase advance is 90H. When the field frequency is 50 Hz, the phase advance is 75H. 0H_SD_DLAY: The SDTV signals are delayed and set in-phase with the HDTV signals. • When the setting of this item is set to "0H" or "ADVANCE" while the field frequency is 50 Hz, images in SD format are delayed by 1 frame + 75 lines only when letterbox is selected for DOWNCONVERT MODE. For the relationship with the sync phase, refer to Operating Instructions of AK-HCU200. 20dB 40dB 60dB ADVANCE: 59.94Hz→90H 50Hz→75H Performs coarse adjustment of MIC1 gain. Item MIC1 AMP MIC2 GAIN MIC2 AMP Display -20dB ‫׀‬ 0 ‫׀‬ 20dB 20dB 40dB 60dB -20dB ‫׀‬ 0 ‫׀‬ 20dB Function Makes fine adjustments of the MIC1 gain. (in 1 dB increments) Makes coarse adjustments of MIC2 gain. Makes fine adjustments of MIC2 gain. (in 1 dB increments) FUNCTION ＯＦＦ Item ALC LEVEL ALC SPEED ALC WINDOW ALC PEAK ALC RANGE ASU SETUP ASU REF FILE ASU MASTER PED SET ( indicates factory default settings.) Display Function 0 Adjusts the auto iris level of the ‫ ׀‬lens iris. 50 ‫׀‬ 100 1 Sets the feedback speed of the ‫ ׀‬auto iris. 15 Feedback speed drops as the ‫ ׀‬numbers increase. 25 1 Sets the image detection area ‫ ׀‬window for the auto iris. 4 0 Sets the ratio between the ‫ ׀‬average and peak values of auto 60 iris image detection. ‫׀‬ 100 NORMAL 3/4 2/4 1/4 Sets the correction range for adjustments of the iris level using the IRIS knob to move the iris lever in auto iris mode. OUT FULL Selects the auto setup mode OUT EASY setting. FACTORY USER1 USER2 USER3 Selects the file to be referenced when auto setup has been started. 0.0% ‫׀‬ 2.0% ‫׀‬ 7.5% Sets the position where the master pedestal is to be converged when auto setup is started. 22