Panasonic AV-HS410 Operating Instructions Basic - Page 13

Be sure to ask your dealer., Clamping torque

Get Panasonic AV-HS410 PDF manuals and user guides View all Panasonic AV-HS410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Installation and connections (Be sure to ask your dealer.) 1 Turn off the power of the unit, and disconnect the power cable. 2 Loosen the two screws of SLOT A or SLOT B at the back of the unit, and remove the blank panel. SLOT B SLOT A Screw Blank panel Screw 3 Align the option board with the guide rails, and insert it slowly. Insert it until it will go no further. Take care not to exert excessive force while doing this since that may damage the connector inside. 4 Mount the option board in place using the two screws. Clamping torque: 0.7 N•m DVI / APNrALOG OUTPUTS DVI-I Pb Y Screw Screw 5 After connecting the necessary cables, plug the power cable into the power outlet, and turn on the power. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
13
Installation and connections
(Be sure to ask your dealer.)
1
Turn off the power of the unit, and disconnect the power cable.
2
Loosen the two screws of SLOT A or SLOT B at the back of the unit, and remove the blank panel.
Screw
Blank panel
Screw
SLOT A
SLOT B
3
Align the option board with the guide rails, and insert it slowly.
Insert it until it will go no further. Take care not to exert excessive force while doing this since that may damage the connector
inside.
4
Mount the option board in place using the two screws.
Clamping torque:
0.7 N•m
Y
Pb
Pr
DVI-I
DVI / ANALOG
OUTPUTS
Screw
Screw
5
After connecting the necessary cables, plug the power cable into the power outlet, and turn on the power.