Panasonic AV-HS410 Operating Instructions Basic - Page 35

4. Specifications SDI outputs Composite input (Option board) Analog input (Option board) Analog output (Option board) DVI-I input (Option board) DVI-I output (Option board) DVI-D input (Option board) HD-SDI: HD Serial digital (SMPTE 292M) SD-SDI: SD Serial digital (SMPTE 259M) 5 signal lines, standard: OUT1 2; OUT2 to OUT5 1 each 9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M7 boards are used) HD: SMPTE 292M (BTA S-004B) standard complied with • Output level 0.8 V [p-p] 10 % • Rise time HD: Less than 270 ps • Fall time HD: Less than 270 ps • Difference between rise time and fall time HD: Less than 100 ps • Alignment jitter HD: Less than 0.2 UI (130 ps) • Timing jitter HD: Less than 1.0 UI • Eye aperture ratio More than 90 % • DC offset 0 0.5 V SD: SMPTE 259M standard complied with • Output level 0.8 V [p-p] 10 % • Rise time Less than 1.5 ns • Fall time Less than 1.5 ns • Difference between rise time and fall time Less than 0.5 ns • Jitter Less than 0.2 UI Analog composite signal (NTSC/PAL) (1.0 V [p-p], 75 ) 4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M6 boards are used; with loop-through) SD/HD analog component Y/PB/PR (1.0 V [p-p], 75 ) 4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M2 boards are used) SD/HD analog component Y/PB/PR (1.0 V [p-p], 75 ) 4 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M4 boards are used) pp 2 signal lines (OUT A1, OUT B1) when two AV-HS04M5 boards are used. Analog/digital RGB: XGA (1024768), WXGA (1280768), SXGA (12801024) Vertical frequency: 60 Hz pp This connector does not support the HDCP technologies. 4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M3 boards are used) Analog/digital RGB: XGA (1024768), WXGA (1280768), SXGA (12801024), WSXGA+  (16801050), UXGA  (16001200), WUXGA  (19201200) : Selectable only when digital signals are output. Vertical frequency: 60 Hz pp This connector does not support the HDCP technologies. 2 signal lines, maximum: OUT A2, OUT B2 (When two AV-HS04M5 boards are used) Digital RGB: XGA (1024768), WXGA (1280768), SXGA (12801024), WSXGA+ (16801050), UXGA (16001200), WUXGA (19201200) Vertical frequency: 60 Hz Digital RGB: 1080/50p, 1080/59.94p pp Analog input signals are not supported. pp This connector does not support the HDCP technologies. 4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M8 boards are used) pp The DVI-I connector cable cannot be used. pp For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft). 35