Panasonic AV-HS410 Operating Instructions Basic - Page 6

Before use, Overview, Concerning the ratings display, Disclaimer of warranty, Network security - switcher manual

Page 6 highlights

Before use wwOverview This unit is a 1 ME digital video switcher which supports a multiple number of HD and SD formats. Despite its compact size, it comes with eight SDI inputs, one DVI-D input, five SDI outputs and one DVI-D output. The unit comes with a luminance key and chroma keys provided as keyers in addition to the background transitions based on the cut, mix and wipe functions. It also has one DSK line and two PinP lines for enabling video recording, playback and a host of other video production functions. Furthermore, using the multi view display settings, the screen of a monitor can be split into a number of sections to accommodate up to sixteen images, enabling the number of monitors to be reduced and a space‑saving system to be configured at low cost. wwConcerning the ratings display The unit's name, model number and electrical ratings are indicated on its side panel. wwDisclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: 1 A NY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT; 2 P ERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER; 3 U NAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER; 4 INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; 5 A NY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY; 6 A NY INCONVENIENCE, DAMAGES OR LOSSES RESULTING FROM ACCIDENTS CAUSED BY AN INADEQUATE INSTALLATION METHOD OR ANY FACTORS OTHER THAN A DEFECT IN THE PRODUCT ITSELF; 7 L OSS OF REGISTERED DATA CAUSED BY ANY FAILURE; 8 A NY DAMAGE OR CLAIMS DUE TO LOSS OR LEAKAGE OF IMAGE DATA OR SETTING DATA SAVED ON THIS UNIT OR ON A MEMORY CARD OR COMPUTER. wwNetwork security The unit also has functions which are used when it is connected to a network. Using the unit when it has been connected to a network may possibly give rise to the following issues. 1 Leakage or theft of information through this unit 2 U se of this unit for illegal operations by persons with malicious intent 3 Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. pp Use this unit in a network secured by a firewall, etc. pp If this unit is connected to a network that includes computers, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated antivirus program, anti-spyware program, etc.). The following points should be borne in mind as well. pp Use with the same segment is recommended for the equipment which is connected to the unit. If the unit is connected to equipment whose segments are different, events dependent upon the settings inherent to the network equipment, for instance, may occur so thoroughly check the connections with the equipment to which the unit will be connected prior to the start of operation. pp Do not choose an installation location where the unit, cables and other parts will be easily damaged. wwConcerning differences in the system versions This manual describes the functions which can be actuated in any model whose system version is V2.00.00 and up. The applicable functions are referred to as "This function can be actuated in any model whose system version is V2.00.00 and up". If the model has a system version below V2.00.00, the functions concerned cannot be used. Neither will the menus and menu items concerned be displayed. qqHow to check the system version To check the system version of this unit, select System menu  Main Version sub menu  System Version item, and check the display for this item.  Refer to "3-7-3. Displaying the version information and option information" ( Operating Instructions). 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

6
Before use
w
Overview
This unit is a 1 ME digital video switcher which supports a
multiple number of HD and SD formats.
Despite its compact size, it comes with eight SDI inputs, one
DVI‑D input, five SDI outputs and one DVI‑D output.
The unit comes with a luminance key and chroma keys
provided as keyers in addition to the background transitions
based on the cut, mix and wipe functions.
It also has one DSK line and two PinP lines for enabling video
recording, playback and a host of other video production
functions.
Furthermore, using the multi view display settings, the
screen of a monitor can be split into a number of sections to
accommodate up to sixteen images, enabling the number
of monitors to be reduced and a space‑saving system to be
configured at low cost.
w
Concerning the ratings display
The unit’s name, model number and electrical ratings are
indicated on its side panel.
w
Disclaimer of warranty
IN NO EVENT SHALL Panasonic Corporation BE LIABLE
TO ANY PARTY OR ANY PERSON, EXCEPT FOR
REPLACEMENT OR REASONABLE MAINTENANCE OF
THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT
LIMITED TO BELOW:
1
ANY DAMAGE AND LOSS, INCLUDING WITHOUT
LIMITATION, DIRECT OR INDIRECT, SPECIAL,
CONSEQUENTIAL OR EXEMPLARY, ARISING OUT
OF OR RELATING TO THE PRODUCT;
2
PERSONAL INJURY OR ANY DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER;
3
UNAUTHORIZED DISASSEMBLE, REPAIR OR
MODIFICATION OF THE PRODUCT BY THE USER;
4
INCONVENIENCE OR ANY LOSS ARISING WHEN
IMAGES ARE NOT DISPLAYED, DUE TO ANY
REASON OR CAUSE INCLUDING ANY FAILURE OR
PROBLEM OF THE PRODUCT;
5
ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE,
OR LOSS OR DAMAGE, ARISING OUT OF THE
SYSTEM COMBINED BY THE DEVICES OF THIRD
PARTY;
6
ANY INCONVENIENCE, DAMAGES OR LOSSES
RESULTING FROM ACCIDENTS CAUSED BY
AN INADEQUATE INSTALLATION METHOD OR
ANY FACTORS OTHER THAN A DEFECT IN THE
PRODUCT ITSELF;
7
LOSS OF REGISTERED DATA CAUSED BY ANY
FAILURE;
8
ANY DAMAGE OR CLAIMS DUE TO LOSS OR
LEAKAGE OF IMAGE DATA OR SETTING DATA
SAVED ON THIS UNIT OR ON A MEMORY CARD OR
COMPUTER.
w
Network security
The unit also has functions which are used when it is
connected to a network. Using the unit when it has been
connected to a network may possibly give rise to the following
issues.
1
Leakage or theft of information through this unit
2
Use of this unit for illegal operations by persons with
malicious intent
3
Interference with or stoppage of this unit by persons
with malicious intent
It is your responsibility to take precautions such as those
described below to protect yourself against the above network
security risks.
Use this unit in a network secured by a firewall, etc.
If this unit is connected to a network that includes
computers, make sure that the system is not infected
by computer viruses or other malicious entities (using
a regularly updated antivirus program, anti‑spyware
program, etc.).
The following points should be borne in mind as well.
Use with the same segment is recommended for the
equipment which is connected to the unit.
If the unit is connected to equipment whose segments
are different, events dependent upon the settings inherent
to the network equipment, for instance, may occur so
thoroughly check the connections with the equipment
to which the unit will be connected prior to the start of
operation.
Do not choose an installation location where the unit,
cables and other parts will be easily damaged.
w
Concerning differences in the
system versions
This manual describes the functions which can be actuated in
any model whose system version is V2.00.00 and up.
The applicable functions are referred to as
“This function
can be actuated in any model whose system version is
V2.00.00 and up”
.
If the model has a system version below V2.00.00, the
functions concerned cannot be used.
Neither will the menus and menu items concerned be
displayed.
q
How to check the system version
To check the system version of this unit, select System
menu
Main Version sub menu
System Version item,
and check the display for this item.
Refer to “3‑7‑3. Displaying the version information
and option information” (<Operations and Settings>
Operating Instructions).