Panasonic AV-HS410 Plug-In Software User Guide - Page 9

Live Switcher AV-HS410 Plug-in Software 3. GVG Protocol This application makes it possible to have the crosspoint switching, AUTO transitions and other operations controlled once a remote control panel (VS-R45 made by Venetex) or editor (that supports the GVG100 communication protocol) has been connected with a serial interface (RS-422). The GVG100 communication protocol is supported.  There are no parameters on the sub-menus. 3.1. Communication port Connect the remote control panel or editor to the Editor connector on the rear panel of the AV-HS410 using an RS-422 straight cable. 3.2. Verified models  AG-A850  VS-R45 (serial) 3.3. Functions Select the sub-menu concerned from the Plug-in menu and press [F2] (Open Menu) to display the menu of the Plug-in concerned. The AV-HS410 is subject to the following types of control from the remote control panel or editor. ＜Details of control＞ Bus switching Button trigger (Pushbutton control) The bus materials are selected from the following. ・A/B ・Key fill/key source ・DSK fill/DSK source ・PinP1, PinP2 ・AUX1 to AUX4 The same operations are performed as when the following buttons have been pressed on the control panel of the AV-HS410. ・Auto button ・DSK button ・WIPE button ・MIX button ・PinP1 button ・Pinp2 button ・Key button © Panasonic Corporation 2011 - 9 -