Panasonic AW-HE42 CGI and Streaming Protocol Specifications - Page 102
About Control Based on RTCP
![]() |
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
12. About Control Based on RTCP The remote camera also supports dynamic control of bit rate and frame rate according to the line status using RTCP. As a prerequisite, a client that supports RTCP/SR (Sender Report) and RTCP/RR (Receiver Report) is necessary. You must make the settings described below in the WEB menu as preparations at the remote camera side. ▪ Set H264(X)/Transmission priority to Best effort. * In the case of the frame rate (factory settings) and constant bit rate, an RTCP/SR is transmitted and an RTCP/RR is received, but these are not used for controlling the bit rate and frame rate. ▪ Select H264(X)/Image quality from Motion priority or Image quality priority. Motion priority: This is the motion priority mode. The bit rate is actively changed and supported. Image quality priority: This is the image quality priority mode. The frame rate is actively changed. The sequence during RTCP control is illustrated below: Note that in the remote camera, an RTCP/SR is transmitted every five seconds, and of the RTCP/RRs, only those related to VIDEO are used. Integrated Camera Interface Specifications / Supplement for Web Control 101
![](/manual_guide/products/panasonic-awhe42-cgi-streaming-protocol-specifications-2ceb780/102.png)