Panasonic AW-HE42 CGI and Streaming Protocol Specifications - Page 93
UDP Multicast
![]() |
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
11.2. UDP Multicast You must make the settings described below in the WEB menu as preparations at the remote camera side. ▪ Set H264(X)/Transmission type to Multicast. ▪ Set H264(X)/Multicast address (set to 239.192.0.20 for H264(1) according to factory settings) ▪ Set H264(X)/Multicast port (set to 37004 for H264(1) according to factory settings) The port number and multicast address during transmission of the video and audio stream depend on the values of the WEB menu of the remote camera, and the commands from the client side are ignored. The acquisition method of video and audio stream by the UDP Multicast method is illustrated below. Integrated Camera Interface Specifications / Supplement for Web Control 92
![](/manual_guide/products/panasonic-awhe42-cgi-streaming-protocol-specifications-2ceb780/93.png)
Integrated Camera Interface Specifications / Supplement for Web Control
92
11.2. UDP Multicast
You must make the settings described below in the WEB menu as preparations at the remote camera side.
▪
Set H264(X)/Transmission type to Multicast.
▪
Set H264(X)/Multicast address (set to 239.192.0.20 for H264(1) according to factory settings)
▪
Set H264(X)/Multicast port (set to 37004 for H264(1) according to factory settings)
The port number and multicast address during transmission of the video and audio stream depend on the
values of the WEB menu of the remote camera, and the commands from the client side are ignored.
The acquisition method of video and audio stream by the UDP Multicast method is illustrated below.