Panasonic AW-UE100 IPSerial Control Interface Specifications - Page 4

2.Configuration outline This manual has the following general configuration. ① Overview of the external interface It is possible to control the pan, tilt and white balance adjustments. It is also possible to acquire the gain and other camera information by initiating queries. The various functions are employed for the operations with the camera using HTTP which is the host protocol of TCP. For further details, refer to chapter 3 and chapter 4. ②Camera information update notification The local terminal is notified of the values of the gain and other settings which have been changed at another terminal or other terminals so that it can acquire the camera information. This feature is useful when one camera is controlled by a multiple number of terminals, and when the setting for enabling update notifications to be received has been established, the information which has been changed by other terminals can be acquired. For further details, refer to chapter 5. ③Camera information batch acquisition The camera information can be acquired in batch form. Since there is no need to query each and every camera information item when this feature is used, the feature is useful when all the camera information is required such as at startup. For further details, refer to chapter 6. ④Error return An error whether ER1, ER2 or ER3 is returned when an error has been generated by a command in ① above or when the AWB result contains an error. For further details, refer to chapter 7. ⑤Menu list and command correspondence table This table which summarizes AW-UE100 menu list and commands related to each menu item. For further details, refer to chapter 8. ⑥Control and request command Describes the specifications of commands used in AW-UE100. For further details, refer to chapter 9. © Panasonic Corporation 2020 All Rights Reserved. 4