Panasonic AWE860 AWE860 User Guide - Page 20
Connection of a remote control box RCB, AC adapter AW-PS505, Video signal IN, RCB WV-CB700A
View all Panasonic AWE860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connections $ Connection of a remote control box (RCB) The RCB (WV-CB700A) and the camera must be connected with the optional RCB cable AW-CA50T10. 1. Turn RCB power off before connecting cables. 2. Connect the 50-pin connector of the RCB cable to I/F REMOTE connector of the camera. The 10-pin connector must be connected to the RCB. 3. Turn RCB power on and the camera can be controlled remotely by the RCB. Notes: • The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommended that the signals from the monitor output be used for monitoring purposes only. • No gen-lock signal is available from the RCB. • If a longer distance (more than 3 m) is desired between the camera and the RCB, use the following optional cable. AW-CA50B10 and WV-CA10B02 (2 m) WV-CA10B25 (25 m) WV-CA10B50 (50 m) RCB cable AW-CA50T10 (3 m) DC Power supply Cable AW-CA4T1 Video signal IN MONITOR OUT RCB AC adapter AW-PS505 -20- RCB WV-CB700A