Panasonic AWE860 AWE860 User Guide - Page 27
Gen-lock adjustment, Horizontal phase control, ADJUSTMENT by CAMERA], ADJUSTMENT with RCU RCB
View all Panasonic AWE860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
$ Gen-lock adjustment Phase adjustments must be performed with the camera or the RCU (RCB) when external synchronizing signals are supplied to the system in cases where multiple cameras are used or peripheral devices are connected. U Horizontal phase control Observe the waveform of the external synchronizing input signal (black burst signal) and video output signal on a two-channel oscilloscope. Then match the horizontal phase of both signals by adjusting them with the cameras or RCU's horizontal phase control. External gen-lock input signal (black burst output of special effect generator) NO/BAR switch YES/ABC switch [ADJUSTMENT with RCU (RCB, Hybrid control panel )] Use the horizontal phase control. Video signal Adjust the horizontal phase [ADJUSTMENT by CAMERA] 1. Press the NO/BAR switch for over 5 seconds to display the color bar. 2. Select [G/L Adjustment] on the main menu, then select [H Phase] on the submenu. 3. Adjust the horizontal phase with the YES/ABC and NO/BAR switch. -27- Horizontal phase control Subcarrier phase fine control Subcarrier phase coarse control