Panasonic AWE860 AWE860 User Guide - Page 51
Flare Correction Level Setting [Flare R/G/B: 0 to 100
View all Panasonic AWE860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
; Other Set Display o Gamma Level Setting [Gamma: 0.35 to 0.55] Gamma correction level can be set. p Knee Level Setting [Knee Point: 88% to 98%, Dynamic] 88% to 98%: The level of video signals subject to knee (knee point) can be set. Dynamic: Knee level is automatically adjusted according to the scene. q White Clip Level Setting [White Clip: 95% to 110%] The peak level of video signals to be white-clipped can be set. r Flare Correction Level Setting [Flare R/G/B: 0 to 100] Flare correction level can be adjusted. s Black Stretch Setting [Black Stretch: ON, OFF] Black stretch to correct the suppression of black portions at low luminance can be set to ON or OFF. t Clean DNR Setting [Clean DNR: OFF, Low, High] This enables the clean DNR effect to be selected. u CCD Read Out Mode Setting [Field/Frame: Field, Frame 1, Frame 2] Field: CCD storage will be by field storage. Frame 1: Vertical resolution increases in frame storage. Frame 2: Vertical resolution is raised without increasing residual images by frame storage and electronic shutter. v PC Control Access Speed Setting [Baud Rate: 1200bps, 2400bps, 4800bps, 9600bps] This setting is to select a communication speed in controlling the camera from the computer. w Component Output Setting [Component: RGB, Y/Pr/Pb, Y/C] This enables RGB, Y/Pr/Pb or Y/C to be selected as the component signals which are to be output from the I/F REMOTE connector. x Aspect Ratio Selection [Aspect Ratio: 16:9, 4:3] Aspect ratio can be selected from 16:9 or 4:3. y Fan Setting [Fan SW: OFF, Auto] OFF: Select this setting to stop the fan when its operating sound is found to be bothersome in a studio or other such environment. Auto: The temperature is detected automatically, and the fan starts operating when the temperature exceeds approx. 95°F (35°C). Under normal circumstances, the "Auto" setting is used. z Language Selection [Language: English, Japanese] English: Menu screen is displayed in English. Japanese: Menu screen is displayed in Japanese. -51-