Panasonic AWE860 AWE860 User Guide - Page 36

Menu item setting Notes • Only 0 dB, 9 dB, or 18 dB can be selected in case of using the RCU (RCB). • 0 dB when the manual GAIN switch on the hybrid control panel is at LOW, 9 dB when it is at MID, or 18 dB when it is at HIGH. Manual GAIN switch Hybrid control panel 8 Black Level Setting [Pedestal: -150 to +150] The black level (pedestal) of the luminance (Y) signal can be set. Used in adjusting the black levels of two or more cameras. 2 Color Set Display 9 Chroma Level Adjustment [Chroma Level: -3 to +3] Chroma Level can be decreased or increased to any of three levels each.The signal output to the optional card cannot be adjusted. : Skin Color Adjustment [Flesh Tone: -3 to +3] Skin color can be decreased or increased to any of three levels each. ; White Balance Setting [White Bal: ATW, AWC A, AWC B, 3200K, 5600K] ATW: The white balance is automatically adjusted to be always right. AWC A, AWC B: Once the white balance is adjusted with the ITEM/AWC switch on the back of the camera, it is no longer necessary to set the white balance again if you simply select AWC A or AWC B, provided that the camera is used under the same conditions. Fine color adjustment can be made after setting AWC by red/blue gain adjustment in user mode or from the RCU (RCB). 3200K: The white balance is adjusted to 3200K illumination. -36-