Panasonic CFVDW07CRFM CFVDW07CRFM User Guide - Page 23

Battery Menu

Page 23 highlights

Battery Menu By selecting [Battery], the battery status will be displayed. General Wireless Battery Option Version Status : Full Charge Voltage : 8154mV Current : 0mA Temperature : 26.2 °C (79.2 °F) Remain : 100% Error : None Refresh Battery : Execute Environment : Normal temperature 100% Excellent OK Cancel (This screen is a sample.) Run the refresh battery. When the confirmation message is displayed, select [Yes]. Once the battery indicator turns green, the battery pack will be completely discharged, the wireless display will power off automatically, and then charging will commence. It takes approximately 2 hours until the power automatically goes off through the complete discharge of the battery from the fully charged state. Allow the battery pack to charge until the battery indicator turns green. (While charging, the backlight is turned off automatically.) Set the high temperature mode function to [Normal temperature] or [High temperature]. When using the wireless display in a high-temperature environment, be sure to set the wireless display in the high-temperature mode. NOTE The battery will not be refreshed correctly in the following cases. • When the power of the wireless display is cut. • When the electric power becomes disconnected (e.g., electrical outage, acci- dental removal of the AC adaptor, etc.). 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

23
Set the high temperature mode func-
tion to [Normal temperature] or
[High temperature].
When using the wireless display in a
high-temperature environment, be
sure to set the wireless display in the
high-temperature mode.
Battery Menu
By selecting [Battery], the battery status will be displayed.
General
Wireless
Battery
Option
Version
100%
Excellent
OK
Cancel
Run the refresh battery.
When the confirmation message is
displayed, select [Yes].
Once the battery indicator turns green,
the battery pack will be completely
discharged, the wireless display will
power off automatically, and then
charging will commence. It takes ap-
proximately 2 hours until the power
automatically goes off through the
complete discharge of the battery from
the fully charged state.
Allow the battery pack to charge un-
til the battery indicator turns green.
(While charging, the backlight is
turned off automatically.)
NOTE
The battery will not be refreshed correctly in the following cases.
When the power of the wireless display is cut.
When the electric power becomes disconnected (e.g., electrical outage, acci-
dental removal of the AC adaptor, etc.).
(This screen is a sample.)
Status
:
Full Charge
Voltage : 8154mV
Current
: 0mA
Temperature
:
26.2 °C (79.2 °F)
Remain
: 100%
Error : None
Refresh Battery
: Execute
Environment
:
Normal temperature