Panasonic CFVDW07CRFM CFVDW07CRFM User Guide - Page 30
Fingerprint Scanner
View all Panasonic CFVDW07CRFM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Fingerprint Scanner How to Use To avoid possible damage to the fingerprint scanner by static electricity or improper finger placement, read the following guidelines. 1 Static Electricity Discharge: Before a scan is taken, have the person whose fingerprint is to be taken touch the closed shutter with a finger to discharge static electricity. 2 When opening the shutter: Slide the shutter open. Do not pull the shutter to open it, as the fingernail may scratch the scanner. 3 Optimum finger scanning position: Place the whorls of the fingerprint on the center of the scanner to scan the characteristic part of the finger. (Since the best position for a fingerprint depends on individuals, adjust the finger position as needed.) 4 When closing the shutter: Slide the shutter back. Do not push the shutter to close it, as the fingernail may scratch the scanner. NOTE Keep the shutter closed at all times except when in use. This will prevent the scanner from any impact or moisture. Touch the shutter and the scanner with the finger only, so as not to damage them. Do not touch them with a ballpoint pen, tools, etc. Wipe the finger to be scanned with a cloth. Even if you feel that the fingerprint scanner is warm after the shutter has been closed for a long time, there is no problem. Care of the Sensor To maintain optimal performance, clean the scanner surface periodically. Remove dirt and grease from the scanner surface with rubbing alcohol and cotton, and dry with a clean tissue. Do not any abrasive liquids or cloths on the scanner surface. 30