Panasonic DMC-FZ18K Digital Still Camera - Page 113
Printing the Pictures - black digital camera
UPC - 037988986941
View all Panasonic DMC-FZ18K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
correctly when the camera is connected to a PC. Import the motion picture files to the PC and then play them back. • If battery power is exhausted while the camera and the PC are communicating, the recorded data may be damaged. When you connect the camera to the PC, use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional). • If the remaining battery power becomes low while the camera and the PC are communicating, the alarm beeps. In this case, stop the communication at once on the PC. • When connecting the camera to a "Windows 2000" OS PC with the USB connection cable, do not replace the card while the camera and the PC are connected. The information on the card may be damaged. Use "Safely Remove Hardware" in the task tray on your PC when replacing the card. • Pictures edited or rotated with a PC may be displayed in black in playback mode, multi playback and calendar playback. • Read the operating instructions for the PC. • If a card is not inserted when the camera is connected to the PC, you can edit or access the pictures on the built-in memory. If a card is inserted, you can edit or access the pictures on it. • You cannot switch between the built-in memory and the card while the camera is connected to the PC. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the PC again. • The message [PLEASE RE-CONNECT THE PRINTER.] appears if you change the mode dial to print mode [ ] while this unit is connected to a PC. If connecting the printer again, change the mode to a mode other than [ ] and then check that no data is being transferred. ([ACCESS] appears on the LCD monitor of this unit while data is being transferred.) Connecting to other equipment Printing the Pictures By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to print and start printing on the camera's screen. Set print settings such as the print quality on the printer beforehand. (Read the printer operating instructions.) DIGITAL/ AV OUT DC IN 8.4V A USB connection cable (supplied) B AC adaptor (DMW-AC7PP; optional) • It may take time to print some pictures. Use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional) when you connect to a printer. • Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC7PP; optional). 1 Turn on the camera and the printer. 2 Set the mode dial to [ ]. 3 Connect the camera to a printer via the USB connection cable A (supplied). 113 VQT1F83