Panasonic DMC-GH1K Digital Still Camera - Page 175
Reddish horizontal streaks appear on the LCD monitor during recording.
UPC - 037988989553
View all Panasonic DMC-GH1K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P86) > Increase the setting for [NOISE RED.] in [FILM MODE] or lower the setting for each of the items other than [NOISE RED.]. (P88) > Take pictures in bright places. > Set the [LONG SHTR NR] to [ON]. (P123) The brightness or the hue of the recorded picture is different from the actual scene. • If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction. Reddish horizontal streaks appear on the LCD monitor during recording. • This is characteristic of MOS sensors which serve as the camera's pickup sensors. It appears when the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not a malfunction. It is recorded in motion pictures but is not recorded on still pictures. • It is recommended that you take pictures while taking care not to expose the screen to sunlight or any other source of strong light. Motion picture recording stops in the middle. • It is recommended to use a card with SD Speed Class¢ with "Class 6" or higher when recording motion pictures. ¢ SD speed class is the speed standard regarding continuous writing. • Depending on the type of the card, recording may stop in the middle. > When you set the picture quality to [ ], [ ] or [ ], we recommend using a high-speed card with "10MB/s" or greater displayed on the package. > In the event that it stops even after using a "10MB/s" card or higher, the data writing speed has deteriorated so it is recommended to make a backup and then format (P38). You cannot compensate the exposure. • Are you in Exposure Compensation operation? > Press the front dial to switch to Exposure Compensation operation. (P71) Subject cannot be locked. (AF tracking not possible) • Set the AF area to the distinctive color of the subject if there is a part that is different from the surrounding color. (P78) VQT2A61 175