Panasonic DMC-GH1K Digital Still Camera - Page 86

Advanced (Recording pictures) • The White Balance Bracket setting is released when the power has been turned off (including power save mode). • Pictures can be taken with White Balance Bracket regardless of the drive mode settings. • You will only hear the shutter sound once. • White Balance Bracket cannot be set when the [QUALITY] is set to [ ], [ ], or [ ]. • White Balance Bracket does not work when recording motion picture. [REC] mode: Setting the Light Sensitivity This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. Press 3 ( ). Press 3/4/2/1 to select the ISO sensitivity and then press [MENU/SET] to set. • You can also use the front dial to set. • You can also press the shutter button halfway to set. ISO sensitivity Recording location (recommended) Shutter speed Noise 100 When it is light (outdoors) Slow Less 3200 When it is dark Fast Increased ISO sensitivity AUTO¢ ¢ (Intelligent) 100/200/400/800/1600/3200 Settings The ISO sensitivity is automatically adjusted according to the brightness. The ISO sensitivity is adjusted according to the movement of the subject and the brightness. The ISO sensitivity is fixed to various settings. (When the [ISO INCREMENTS] in [REC] mode menu (P123) is set to [1/3 EV], items of ISO sensitivity that can be set will increase.) ¢ When the [ISO LIMIT SET] of [REC] mode menu (P123) is set to anything except [OFF], it is set automatically within the value set in [ISO LIMIT SET]. It is set as following when the [ISO LIMIT SET] is set to [OFF]. • When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on brightness within a maximum setting of [ISO400]. 86 VQT2A61