Panasonic DMC-GH1K Digital Still Camera - Page 18
Set the [O.I.S.] switch to [ON]., turning the lens as far as possible in - lenses
![]() |
UPC - 037988989553
View all Panasonic DMC-GH1K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparation ∫ Optical Image Stabilizer The 14 -140 mm/F4.0 -5.8 lens included in the DMC-GH1K has a stabiliser function. The Optical Image Stabilizer function is set for activation when the lens is attached to the camera body. Set the [O.I.S.] switch to [ON]. • You can change the Optical Image Stabilizer mode to [MODE1], [MODE2] or [MODE3] using [STABILIZER] in the [REC] mode menu. (P119) It is set to [MODE1] at the time of purchase. • We recommend setting the [O.I.S.] switch to [OFF] when using a tripod. If the [O.I.S.] switch is set to [OFF], [ ] is displayed on the LCD monitor/Viewfinder. Detaching a lens from the camera body Attach the lens cap. Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it. • Always attach the body cap to the camera body so that dirt or dust does not get inside. • Attach the lens rear cap so that the lens contact point does not get scratched. Note • Change lenses where there is not a lot of dirt or dust. Refer to P167 when dirt or dust gets on the lens. • When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the lens. • Be careful not to lose the lens cap, the lens rear cap and the body cap. 18 VQT2A61
![](/manual_guide/products/panasonic-dmcgh1k-digital-camera-1cc6936/18.png)