Panasonic DMC-GH1K Digital Still Camera - Page 69
Adjust the flash output, Select [FLASH ADJUST.] in the [REC] mode menu. P30, Press
![]() |
UPC - 037988989553
View all Panasonic DMC-GH1K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Advanced (Recording pictures) Note • Do not bring the flash too close to objects or close the flash while it is activated. The objects may be discolored by its heat or lighting. • Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/ Red-eye reduction etc. It causes a malfunction. • When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark. • When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully. • The white balance may not be properly adjusted if the flash level is insufficient for the subject. • When taking a picture with the flash, we recommend removing the lens hood. In some cases it may not allow the scene to be illuminated properly. • It may take time to charge the flash if you repeat taking a picture. Take a picture after the access indication disappears. • The red-eye reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident. • When you attach an external flash, it takes priority over the built-in flash. Refer to P159 for the external flash. Adjust the flash output Applicable modes: Adjust the flash output when the subject is small, or the reflectivity is very high or low. Select [FLASH ADJUST.] in the [REC] mode menu. (P30) Press 2/1 to set the flash output and then press [MENU/SET] . • You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV]. • Select [0 EV] to return to the original flash output. • You can also use the front dial to set. Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu. Note • [i] or [j] is displayed on the flash icon in the LCD monitor/viewfinder when the flash level is adjusted. • The flash output setting is memorized even if the camera is turned off. VQT2A61 69
![](/manual_guide/products/panasonic-dmcgh1k-digital-camera-1cc6936/69.png)