Panasonic DMR-E65S Dvd Recorder - Page 17

Picture quality Recording ∫ To specify a time to stop recording-One Touch Recording During recording Press [¥ REC] to select the recording time. Each time you press the button: 0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00 Counter (cancel This does not work during timer recordings (➡ page 19) or while using Flexible Recording (➡ page 18). To stop recording partway Press [∫]. Off Timer The unit switches to standby after about 6 hours in the stop mode. You can turn this feature off or change the time to 2 hours (➡ page 42, "Off Timer"). Recording modes and approximate recording times Depending on the content being recorded, the recording times may become shorter than indicated. (Unit: hour) DVD-RAM DVD-R Mode Single-sided Double-sided (4.7 GB) (4.7 GB) (9.4 GB) XP (High quality) 1 2 1 SP (Normal) 2 4 2 LP (Long play) EP (Extra long play) 4 8 (6§) 8 16 (12§) 4 8 (6§) XP SP LP EP (6H)§ EP (8H) Recording time § When "Recording Time in EP Mode" is set to "EP (6H)" in the SETUP menu. The sound quality is better when using "EP (6H)" than when using "EP (8H)". [Note] When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players that are compatible with DVD-RAM. In this case use EP (6H) mode. FR (Flexible Recording Mode) The unit automatically selects a recording rate between XP and EP (8H) that will enable the recordings to fit in the remaining disc space with the best possible recording quality. ≥You can set when programming timer recordings. ≥All the recording modes from XP to EP appear in the display. XP SP LP EP CH Selecting audio to record [RAM] Press [AUDIO]. [. Stereo: Main audio (stereo) l v ≥If the broadcast is "MonoiSAP", audio will be l monaural even if you select Stereo mode. l SAP: l l v Secondary audio program (SAP) ≥If recorded in SAP mode, main audio is also recorded. a- Mono: Main audio (monaural) ≥Select "Mono" if reception is poor during a stereo broadcast. No disc e.g., "Stereo" is selected "((" appears when the unit is receiving the audio type you selected. CH 12 (( Stereo ≥If you change the sound setting while recording, the recorded sound will also change. [DVD-R] [RAM] (When recording sound in LPCM) Select the audio (Main or SAP) in "Select MTS" in the SETUP menu (➡ page 43). RQT7303 17