Panasonic DMR-E65S Dvd Recorder - Page 39

Transferring (dubbing) all the still pictures of a card onto a DVD-RAM- COPY ALL PICTURES [SD] or [PC] > [RAM] Preparation Press [SD/PC] to select the source drive. 1 While stopped Press [FUNCTIONS]. 2 Press [3, 4, 2, 1] to select "COPY ALL PICTURES" and press [ENTER]. 3 Press [3, 4] to select "Copy from" and press [2, 1] to select the drive. Copy All Pictures (JPEG) Copy from \DCIM SD card Copy to DVD \JPEG\DCIM001 Copy all pictures (JPEG) in the card ≥If there is a multiple number of higher folders recognizable, you can switch them using [2, 1]. 4 Press [3, 4, 2, 1] to select "Copy" and press [ENTER]. To stop transferring (dubbing) Press and hold [RETURN] for 3 seconds. To return to the previous screen Press [RETURN]. Recording from a video cassette recorder Refer to the control reference on page 38. [RAM] [DVD-R] Preparation ≥Connect a video cassette recorder to this unit's input terminals. ≥Press [DVD] to select the DVD drive. [Note] When recording using this unit's input terminals, only the sound received at the time of recording will be recorded. As long as secondary audio that is recorded on the video cassette is not output on the unit in play, it is not recorded. e.g.: Connecting to the L2 input terminals ≥Turn off the unit and other video equipment before connecting. This unit POWER SD CARD PC CARD EJECT L2 S-VIDEO IN VIDEO IN L/MONO AUDIO IN R OPEN/CLOSE TIME SLIP DVD SD PC DRIVE SELECT TIME SLIP CH REC /x1.3 S-VIDEO IN VIDEO IN L/MONO - AUDIO IN - R Yellow White Red S-Video cable§ Audio/Video cable Other video equipment Transfer (Dubbing) [Note] ≥When transferring (dubbing) the still pictures on a folder by folder or card by card basis, files other than the still picture files inside the folder will also be transferred (dubbed). (This does not apply to the lower folders contained inside the folders.) ≥If still pictures are already contained inside the transfer (dubbing) destination folder, the new still pictures are recorded following the existing still pictures. ≥If the space on the destination drive runs out or the number of files/folders to be transferred (dubbed) exceeds the maximum (➡ page 28), transferring (dubbing) will stop partway through. ≥When a name has been input by this unit for the transfer (dubbing) source folder, the folder name will be reflected in the transfer (dubbing) destination folder. ≥Print number setting (DPOF) is not transferred (dubbed). ≥The sequence in which the still pictures are registered on the transfer (dubbing) list may not be reflected at the transfer (dubbing) destination. If the audio output of the other equipment is monaural, connect to L/ MONO. § The S-VIDEO terminal achieves a more vivid picture than the VIDEO terminal. 1 While stopped Press [INPUT SELECT] to select the input channel for the equipment you have connected. e.g., If you have connected to L2 input terminals, select "L2". 2 Press [REC MODE] to select the recording mode. 3 Start play on the other equipment. 4 Press [¥ REC]. Recording starts. To skip unwanted parts Press [;] to pause recording. (Press again to restart recording.) To stop recording Press [∫]. To record programs to fill up the remaining space on the disc ➡ page 18, Flexible Recording Almost all videos and DVD software on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit. RQT7303 39