Panasonic DMR-E65S Dvd Recorder - Page 41

Convenient functions Erasing all titles and play lists-Erase all titles [RAM] Preparation ≥Press [DVD] to select the DVD drive. ≥Release protection (➡ page 40). 1 While stopped Press [FUNCTIONS]. 2 Press [3, 4, 2, 1] to select "DISC SETTING" and press [ENTER]. 3 Press [3, 4] to select "Erase all titles" and press [ENTER]. 4 Press [2, 1] to select "Yes" and press [ENTER]. 5 Press [2, 1] to select "Start" and press [ENTER]. A message appears when finished. 6 Press [ENTER]. [Note] ≥Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding. ≥Still picture data (JPEG, TIFF) or computer data cannot be erased. ≥Erase does not work if one or more titles are protected. Erasing all the contents of a disc or card-Format [RAM] [SD] [PC] Preparation ≥Press [DVD] or [SD/PC] to select the drive. ≥Release protection (➡ page 40). 1 While stopped Press [FUNCTIONS]. 2 Press [3, 4, 2, 1] to select "DISC SETTING" or "CARD SETTING" and press [ENTER]. 3 Press [3, 4] to select "Format disc" or "Format" and press [ENTER]. 4 Press [2, 1] to select "Yes" and press [ENTER]. 5 Press [2, 1] to select "Start" and press [ENTER]. A message appears when formatting is finished. 6 Press [ENTER]. [Note] ≥Formatting erases all contents (including computer data), and it cannot be restored. Check carefully before proceeding. The contents are erased when you format it even if you have set protection. ≥Do not disconnect the AC power supply cord while formatting. This can render the disc unusable. Formatting normally takes a few minutes, however it may take up to a maximum of 70 minutes ([RAM]). To stop formatting Press [RETURN]. (You can cancel formatting if it takes more than 2 minutes. The disc or card must be reformatted if you do this.) ≥Formatting cannot be performed on DVD-R or CD-R/RW. ≥When a disc or card has been formatted using this unit, it may not be possible to use it on any other equipment. ≥You cannot format a Microdrive or mobile hard disk on this unit. Enabling DVD-R to be played on other equipment-Finalize [DVD-R] Preparation Press [DVD] to select the DVD drive. 1 While stopped Press [FUNCTIONS]. 2 Press [3, 4, 2, 1] to select "DISC SETTING" and press [ENTER]. 3 Press [3, 4] to select "Select First play" and press [ENTER]. Press [3, 4] to select "Top Menu" or "Title 1" and press [ENTER]. You can select whether to show the top menu after finalizing. Top Menu: The top menu appears first. Title 1: The disc content is played without displaying the top menu. 4 Press [3, 4] to select "Finalize" and press [ENTER]. 1 Press [2, 1] to select "Yes" and press [ENTER]. 2 Press [2, 1] to select "Start" and press [ENTER]. A message appears when finalizing is finished. 3 Press [ENTER]. [Note] After finalizing ≥The disc becomes play-only and you can no longer record or edit. ≥Titles are divided into about 5-minute§ chapters. § This time varies greatly depending on the condition and mode of recording. ≥There is a pause of several seconds between titles during play. Do not disconnect the AC power supply cord while finalizing. This will render the disc unusable. ≥Finalizing takes up to 15 minutes. ≥You cannot finalize DVD-R recorded on other manufacturer's equipment. Before finalizing After finalizing Disc display on this unit DVD-R DVD-V Recording/Editing/Entering name ± t Play on other players t ± DVD-R finalized on this unit may not be playable on other players due to the condition of the recording. ≥Visit Panasonic's homepage for more information about DVDs. http://www.panasonic.com/playDVD-R To exit the screen Press [RETURN] several times. To return to the previous screen Press [RETURN]. RQT7303 41