Panasonic DMR EZ27K Dvd Recorder - English/spanish - Page 53

• You can enjoy high-quality picture and audio by changing the audio/video (AV) cable connection between this unit and your TV on pages 47 to 49 as follows. Connecting with an HDMI (High Definition Multimedia Interface) Terminal HDMI is the next-generation interface for digital devices. When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, enabling you to enjoy high quality digital video and audio with just one cable. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video. • Please use the HDMI cables 5.0 meters or less. Regarding "HDAVI Control" function When connecting with a Panasonic TV (VIERA) or a receiver equipped with "HDAVI Control" function, linked operations are possible. [➔ 26, Linked Operations with the TV (EZ Sync™ "HDAVI Control™")] • It is recommended that you use Panasonic's HDMI cable. Recommended part number: RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc. • Non-HDMI-compliant cables cannot be used. Connecting to a Television Rear of TV HDMI IN HDMI cable (not included) Connecting to an Amplifier or System Component Rear of Amplifier or System Component HDMI IN HDMI OUT Rear of TV HDMI IN HDMI cable (not included) Rear of this unit Rear of this unit • Set "HDMI Video Output" and "HDMI Audio Output" to "On" (➔ 40). (The default setting is "On".) Notes • If connecting to equipment that is only compatible with 2 channel output, audio with 3 channels or more will be down-mixed (➔ 78) and output as 2 channels (some discs cannot be down-mixed). • For display units compatible with HDCP (High bandwidth Digital Content Protection) that are equipped with a digital DVI input terminal (PC monitors, etc.): Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable (audio cannot be output). Connection and Setting 53 RQT8851