Panasonic DMR EZ27K Dvd Recorder - English/spanish - Page 64

Inserting Discs, Inserting/Removing the SD Card, Disc and Card Care, to open the tray. - cleaning

Page 64 highlights

Disc and Card Handling Inserting Discs to open the tray. - Insert a disc. Insert label-up. to close the tray. Notes • When using 8 cm (3˝ ) DVD-RAM or 8 cm (3˝ ) DVD-R, remove the disc from the cartridge. • It is not possible to record or play continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over. Inserting/Removing the SD Card Opening the front panel Press down. Inserting the card Press on the center of the card until it clicks into place. If you are using a miniSD card, insert it into the miniSD card adaptor that comes with the card. ADAPTER Insert and remove this adaptor from the unit. Removing the card Press on the center of the card. Pull it straight out. Closing the front panel Push up. Insert the card label up with the cut-off corner on the right. (Do not forget to close the front panel. ➔ right) When "SD" is flashing or when copying a picture or displaying the Album in the SD card, do not turn off the unit or remove the SD card. Such action may result in malfunction or loss of the card's contents. Disc and Card Care RAM Use cartridges to protect them from scratches and dirt. Holding a disc or card Handle discs by the edges to avoid inadvertently scratching or getting oil from your fingers on the disc. Do not touch the signal surface of discs (the shiny side) or the terminal surface (the metal part) of SD cards. Cleaning discs Discs are not indestructible and occasionally dirt or condensation may appear. Clean by gently wiping with a soft, dry lint-free cloth in a straight line from the center of the disc to the edge of the disc. Return discs to their cases and SD cards to their cartridges when not in use; this helps to protect against scratches and dirt. Storing discs and cards • Do not place or store discs and cards in the following locations: - Direct sunlight - Very dusty or humid areas - Near a heat source - Places that undergo extreme shifts in temperature (condensation can occur) - Where static electricity or electromagnetic waves occur • Keep the Memory Card out of reach of children to prevent swallowing. Discs to avoid • Discs that are not perfectly circular in shape • Warped discs, which may not balance properly in your unit, causing improper operation or damage to the unit • Cracked discs • Discs with exposed adhesive (from removed stickers or labels, such as may occur with rental discs or improperly cared-for discs that were previously labeled or re-labeled) 64 RQT8851

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

64
RQT8851
Inserting Discs
to open the tray.
Insert a disc.
Insert label-up.
to close the tray.
Notes
When using 8 cm (3
˝
) DVD-RAM or
8 cm (3
˝
) DVD-R, remove the disc from
the cartridge.
It is not possible to record or play
continuously from one side of a double
sided disc to the other. You will need to
eject the disc and turn it over.
Inserting/Removing the SD Card
ADAPTE
R
Opening the front panel
Press down.
Inserting the card
Press on the center of
the card until it clicks
into place.
If you are using a
miniSD card, insert it
into the miniSD card
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Insert the card label up with the cut-off corner on the right.
(Do not forget to close the front panel.
right)
Removing the card
Press on the center
of the card.
Pull it straight out.
Closing the front panel
Push up.
When “SD” is flashing or when copying a picture or displaying the Album in the SD card, do not turn off the unit or remove the SD card.
Such action may result in malfunction or loss of the card’s contents.
Disc and Card Care
RAM
Use cartridges to protect them from scratches and dirt.
Holding a disc or card
Handle discs by the edges to avoid inadvertently scratching or getting
oil from your fingers on the disc. Do not touch the signal surface of
discs (the shiny side) or the terminal surface (the metal part) of SD
cards.
Cleaning discs
Discs are not indestructible and occasionally dirt or condensation
may appear. Clean by gently wiping with a soft, dry lint-free cloth in a
straight line from the center of the disc to the edge of the disc.
Return discs to their cases and SD cards to their cartridges when not
in use; this helps to protect against scratches and dirt.
Storing discs and cards
Do not place or store discs and cards in the following locations:
Direct sunlight
Very dusty or humid areas
Near a heat source
Places that undergo extreme shifts in temperature (condensation
can occur)
Where static electricity or electromagnetic waves occur
Keep the Memory Card out of reach of children to prevent
swallowing.
Discs to avoid
Discs that are not perfectly circular in shape
Warped discs, which may not balance properly in your unit, causing
improper operation or damage to the unit
Cracked discs
Discs with exposed adhesive (from removed stickers or labels, such
as may occur with rental discs or improperly cared-for discs that were
previously labeled or re-labeled)
Disc and Card Handling