Panasonic DMRE60 DMRE60 User Guide - Page 7
If Plug-in Auto Tuning fails, Adding and deleting channels, Press [ENTER] to complete Plug-in
View all Panasonic DMRE60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Preparation ≥Confirm that the antenna is connected correctly. ≥Turn on the television and select the appropriate video input to suit the connections to this unit. 1 Press [Í, DVD POWER] to turn the unit on. Select Language Seleccione la Lengua Sélection de Langue English Español Français Press ENTER Pulse ENTER Appuyer sur ENTER 2 Press [3, 4] to select the menu lan- guage and press [ENTER]. e.g., when you select English Auto Channel/Clock Setting Connect antenna cable and if you use a cable box, tune it to your local PBS CH then. . . Please push the ENTER key. ENTER RETURN 3 Press [ENTER]. Plug-in Auto Tuning starts and the unit puts the stations it can receive into channels. The unit then proceeds with Auto Clock Setting. The time is displayed when finished. If the clock is an hour slower or faster than the actual time, go to "Time Zone Adjust" to correct it (➜page 47). 4 When the display shows the correct time Press [ENTER] to complete Plug-in Auto Tuning. If the unit couldn't set the clock automatically Press [ENTER] to show the "Manual Clock Setting" screen. Set the time manually (➜page 47). To start Plug-in Auto Tuning again (after relocation, for example) Antenna system, channel caption, and VCR Plusr guide channel settings all revert to the default values when you perform the procedure below. Timer recording settings are also cleared. When the unit is on and stopped 1 Press and hold [X, CH] and [W, CH] on the main unit for about five seconds. The unit turns off. 2 Press [Í, DVD POWER] to turn the unit on. Follow the above steps 2-4. If Plug-in Auto Tuning fails 1 Press [SETUP] to show the menus. SETUP Channel Set Up Disc Video Audio Display TV Screen Antenna System Auto Channel Setting Channel Caption Preset Channel Caption Manual Channel Caption VCR Plusi CH Setting CATV TAB SELECT RETURN Setting up 2 Press [3, 4] to select "Channel" and press [1]. SETUP Antenna System CATV Auto Channel Setting Channel Channel Caption Preset Channel Caption Set Up Manual Channel Caption 3 Disc Press [3, 4] to select "Antenna Sys- tem" and press [ENTER]. SETUP Antenna System TV Channel Set Up CATV 4 Press [3, 4] to select "TV" or "CATV" and press [ENTER]. The screen shown in step 2 reappears. 5 Press [3, 4] to select "Auto Channel Setting" and press [ENTER]. SETUP Auto Channel Setting Channel Set Up Connect antenna cable and if you use a cable box, tune it to your local PBS CH then... Disc Video Please push the ENTER key. Audio Display If you have not yet set clock, the "Auto Channel/Clock Set- ting" screen appears. 6 Press [ENTER]. Auto setting starts. This takes a few minutes. (To stop auto channel setting, press [RETURN].) When finished, the Complete screen or time display is shown. Press [ENTER]. To return to the previous screen Press [RETURN]. When you are finished Press [SETUP]. Adding and deleting channels Add or delete channels if necessary channels are not set or unnecessary channels are set. While this unit is receiving the antenna signal (but not during recording): 1 Press the numbered buttons to select a channel. e.g., "5": [0] ➜ [5] "15": [1] ➜ [5] "115": [100] ➜ [1] ➜ [5] Unit's display ≥You can also use [W, X, CH] when you are going to delete a channel. 2 Press [ADD/DLT]. The channel is deleted if it was set or added if it was not set. e.g., CHANNEL 15 DELETED Repeat steps 1 and 2 as necessary. 7 RQT6981