Panasonic EP-MA70 Operating Instructions Multi-lingual - Page 14

English Assembly 1 Attaching the controller stand to the right or left side panel Fasten the controller stand with the attachment screws. (4 positions) Use this screw: Attachment screws (M6 × 13) × 4 pcs. (Black) How to tighten the screws Hole Attachment screw • Tighten the 4 screws lightly using your fingers. (Make the screws level with the holes.) • Align the 2 prongs of the side panel with the holes of the controller stand. Controller Stand Allen key • Tighten firmly with the allen key. • Screw may be damaged if you tighten the screw inserted into the hole crookedly using an allen key. 2 Fasten the armrest with the attachment screws. (On both sides) 1 Insert the armrest into the unit. • "R" (right side) and "L" (left side) are indicated at the bottom of the armrest. • Insert the armrest from the top aligning the marks on the side of the armrest. • Be careful to avoid pinching your fingers or the air plugs. 2 Slide the armrest toward the front while pushing it downward. 1 3 Fasten the armrest with the attachment screws. (One position for each side) Use this screw: Attachment screws (M6 × 20) Back × 2 pcs. (Silver) Align the marks. 2 Front How to tighten the screws Allen key • Put an attachment screw on the edge of the allen key and tighten the screw 3 horizontally to the hole. • Screw may be damaged if you tighten the screw inserted into the hole crookedly using an allen key. 13