Panasonic KV-S1057C Operating Instructions - Page 67
Symptom, Possible Cause, Remedy, detection function or set the cards
View all Panasonic KV-S1057C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Appendix Symptom Possible Cause Remedy The paper feed roller or double feed prevention roller have become worn down. Replace the paper feed roller or double feed prevention roller. (page 60) The double feed detectors are dirty. Clean the double feed detectors. (page 54) Right and left sides of the document to be scanned are not the same in height, because of curling or folding. Flatten the document (page 24) and load it again after reducing the number of sheets. Double feeding occurs frequently. The document is printed on an unsupported type of paper or thick paper. Make a copy of the document on paper of a compatible type and thickness (page 23), and then scan the copy. The length of the paper is too short. Make a copy of the document on paper of a compatible size (page 23), and then scan the copy. The document is not aligned correctly. Realign the document. (page 38) Too many sheets are set on the feed tray. Remove sheets until the sheets on the feed tray are under the limit mark on the document guide. The documents are not fed The scanning method is set to one at a time, but in bunches. manual. Select automatic scanning using the manual feed selector. (page 12) A double feed is detected when scanning cards. The cards are set in portrait orientation. Either disable the double feed detection function or set the cards in landscape orientation. The document is wrinkled. Smooth out the document. The rollers are dirty. Clean the rollers. (page 55) Paper jams occur frequently. The document is not aligned correctly. Too many sheets are set on the feed tray. Realign the document. (page 38) Remove sheets until the sheets on the feed tray are under the limit mark on the document guide. Scanned documents have been rolled up in the exit tray area when using the exit guides. The documents are curved or curled. Scan the documents with the exit guides folded. (page 41) Scanned image is skewed. The document guides are not adjusted to the size of the document to be scanned, or the document to be scanned is set slanted on the feed tray. Adjust the document guides properly to the size of the document to be scanned. (page 40) Right and left sides of the document to be scanned are not the same in height, because of curling or folding. Flatten the document (page 24) and load it again after reducing the number of sheets. Operating Manual 67