Panasonic KV S2026C Color Scanner - Page 19
the Push documents in the direction
UPC - 092281824178
View all Panasonic KV S2026C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
6 Adjust the document guides to the size of the documents. Loading Documents Document guides 7 Set documents under the paper feed roller. 1 Lift the paper feed roller as shown in the figure. 2 Push documents in the direction of the arrow until they stop under the paper feed roller. Paper feed roller 1 2 Caution: ≥ Acceptable documents are as follows. Paper size: 50.8 k 70 mm (2.0 k 2.8 in.) to 216 k 356 mm (8.5 k 14 in.) Paper thickness: Single paper feed: 0.05 to 0.15 mm (2.0 to 5.9 mils) Continuous paper feed: 0.06 to 0.15 mm (2.36 to 5.9 mils) Paper weight: Single paper feed: 40 to 127 g/m2 (10.7 to 33.9 lbs.) Continuous paper feed: 50 to 127 g/m2 (13.3 to 33.9 lbs.) If you scan other types of documents, paper jamming or multiple-sheet feeding may occur. ≥ Scanning paper such as carbons or carbonless paper may cause skewing, paper jamming or multiple-sheet feeding because it makes the rollers dirty and the chemicals may cause the rollers to swell up. ≥ The amount of documents should not exceed the limit mark on the document guide. This may cause a paper jam or skew. ≥ Be sure to remove the document from the exit tray after it is scanned. ≥ When you scan the irregular or fragile documents, it is recommended to make a copy and use the copy to scan. ≥ When scanning a curled or folded document, load the document after flattening it. Types of documents to avoid: ≥ OHP sheets, other plastic films, cloths, or metallic sheets. ≥ Paper with irregularities such as tabs, staples, paste, etc. ≥ Documents with wet ink ≥ Thick or irregular documents such as envelopes, documents that are glued together, etc. ≥ Copying paper such as carbon paper ≥ Damaged or wrinkled documents ≥ Irregularly shaped documents ≥ Photographs 19