Panasonic KX-HNB600 Operating Instructions - Page 11
Connections, Note about power connections
View all Panasonic KX-HNB600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connections Insert the AC adaptor plug firmly into the DC jack. Secure the AC adaptor cord by wrapping it around the hook. Connect the AC adaptor to the power outlet. Insert the telephone line cord into the LINE jack and a single-line telephone jack (RJ11C) until you hear a click.*1 DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied).*1 Outdoor Camera (KX-HNC600) or Indoor Camera (KX-HNC200) users only: Remove the label covering the card slot and then insert the microSD card (not supplied) into the slot with the notched corner (1) facing upwards (2) until it clicks into place. *1 This step is only necessary if you want to use the landline phone features. For details about the landline phone features, refer to the User's Guide (page 16). Note: R Use only the supplied Panasonic AC adaptor PNLV236. R A microSD card (not supplied) is required to record images from cameras. Refer to the information about the available microSD card (page 3). Setup R To remove the microSD card, push in the microSD card and then remove it. 4 3 4 5 1 2 6 2 1 Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. For assistance, visit www.panasonic.ca/english/support 11 HNB600C_(en_en)_0113_ver.201.pdf 11 2017/01/13 11:52:25