Panasonic KX-HNB600 Operating Instructions - Page 15
Registering other devices to the hub, Using registration buttons, Using the app
View all Panasonic KX-HNB600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setup 1 Using the mobile device that you want to register, download the [Home Network] app and then start the app. R If prompted, follow the on-screen instructions and select the appropriate region/country. R If prompted to select the device to be set up, tap [Hub]. 2 When prompted, tap [Add This Mobile Device]. 3 When prompted, press MWi-Fi SETUPN on the hub. R Your mobile device will be registered to the hub. 4 When prompted, follow the on-screen instructions and enter the password used to log in to the hub while away from home. 5 When prompted, enter a name for your mobile device and then tap [OK]. R This setting allows you to change the name assigned to your device. It can help you identify your mobile device when performing certain operations, such as deregistering or making intercom calls using a cordless handset. R The app's home screen is displayed when initial setup is complete. Using registration buttons 1 Hub: Press and hold the registration button until the LED indicator blinks slowly in green. R Press and hold the appropriate registration button (page 10) according to the device you want to register. M HANDSET/LOCATORN: For handsets M CAMERAN: For cameras M OTHER DEVICEN: For other devices 2 Handset: Place the handset on the charger. Devices other than handset: Press and hold the device's registration button until the device's LED indicator blinks slowly in green. R When registration is complete, the hub sounds one long beep. Note: R If registration fails, the hub sounds several short beeps. R To register a mobile device, use the procedure described on page 14 Using the app Registering other devices to the hub This procedure is not required for devices that were included as part of a bundle. Before you can use devices such as cameras, sensors, and smart plugs, they must be registered to the hub. If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub. You can register each device by using the registration buttons or the [Home Network] app. 1 Start the [Home Network] app. 2 From the [Home Network] app home screen, tap [Settings]. 3 Tap [Device Registration]. 4 Tap [Registration]. 5 Select the type of device that you want to register. 6 Handset: Place the handset on the charger. Devices other than handset: Press and hold the registration button on the device you want to register until the device's LED indicator blinks slowly in green. R When registration is complete, the hub sounds one long beep. Note: R If registration fails, the hub sounds several short beeps. For assistance, visit www.panasonic.ca/english/support 15 HNB600C_(en_en)_0113_ver.201.pdf 15 2017/01/13 11:52:26