Panasonic KX-HNC600 Installation Guide - US - Page 21
Note about power connections, AC adaptor connection, Power failure
View all Panasonic KX-HNC600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
5 Attach the safety wire to the wall. R Place the ring of the safety wire (A) on the wall. R Place the washer (B) on top of the ring of the safety wire. R Tighten the screw (C) for the safety wire on top of the washer. 1 2 3 Setup 6 Connect the DC cable to the AC adaptor. R Pull the DC cable indoors, and connect the DC cable plug (A) to the AC adaptor plug (B). R Connect the AC adaptor (C) to the power outlet. 1 Outdoors 2 Indoors 1 2 12 Note: R Attach the safety wire while it is bent. R Attach the safety wire high on the wall so that the camera does not strike anyone in the event the camera detaches from the wall. R Do not hang from the camera or stand. 3 Note: R Use only the supplied Panasonic AC adaptor PNLV236. R Be sure to connect the DC cable plug and AC adaptor plug indoors. Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Power failure R The camera will not work during a power failure. For assistance, please visit www.panasonic.com/support 21