Panasonic KX-HNC600 Installation Guide - US - Page 27

Appendix Specifications R Standards DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range DECT: 1.92 GHz - 1.93 GHz R RF transmission power DECT: 115 mW (max.) R Power source 120 V AC, 60 Hz R Power consumption Standby: 1.4 W During operation: 1.5 W (when the LED lights are not lit) 2.3 W (when the LED lights are lit) R Operating conditions -20 °C - 50 °C (-4 °F - 122°F) up to 90% relative humidity (non-condensing) R Transmitting range Approx. 50 m (160 feet) indoors Approx. 300 m (1,000 feet) outdoors R Image sensor 0.3 megapixel CMOS R Minimum illuminance required 0 lx*1 R Focal length Fixed (0.4 m (1.3 feet) - infinity) R Angular field of view (camera angle) Horizontal: approx. 70° Vertical: approx. 50° R Motion detection method Pyroelectric infrared sensor (PIR sensor) and visual sensor R PIR sensor detection range (when the surrounding temperature is approx. 25 °C (77 °F)) Horizontal: approx. 70° Vertical: approx. 20° Detection range: approx. 5 m R Visual sensor detection range Horizontal: approx. 70° Vertical: approx. 50° R IP rating IP55*2 R Adjustable mounting angles Horizontal: ±90° Vertical: facing forward - facing down approx. 60° (adjustable when mounting) R Dimensions Approx. 75 mm ´ 75 mm ´ 173 mm (2 15/16 inches ´ 2 15/16 inches ´ 6 13/16 inches) R Mass (weight) Approx. 305 g (0.67 lb) *1 The IR-LED will be lighted at the low illuminance conditions. *2 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly exposed to water or rain. For assistance, please visit www.panasonic.com/support 27