Panasonic KX-TA30830 KXTA308 User Guide - Page 128

I 3.2 Telephone Features Intercom Calling Allows you to make a call to another extension. Using the handset Any Telephone Lift the handset. extension no. Enter the extension number (100 through 199). Using the Speakerphone PT SP-PHONE INTERCOM or Press SP-PHONE or INTERCOM. extension no. Enter the extension number (100 through 199). Using a DSS (Direct Station Selection) button PT Talk. Talk. Hang up. SP-PHONE Press SP-PHONE. Lift the handset or press SP-PHONE/MONITOR. Press the flexible button assigned as a DSS button. Talk. Hang up or press SP-PHONE. Conditions • After dialing an extension number, you will hear one of the following tones. Ringback tone: Indicates the destination extension is being called. Confirmation tone: Indicates you can perform voice calling (e.g., Paging). Busy tone: Indicates the destination extension is busy. Do Not Disturb (DND) tone: Indicates the destination extension has set the "Do Not Disturb (DND)" feature. PT • An extension number and a name, if programmed, are shown on a display PT during an intercom call. PT • You can assign a DSS button on a flexible button through Station Programming. The stored number can be displayed by pressing the desired DSS button while on-hook. Programming References • Station Programming (Section 2) Flexible Button Assignment - Direct Station Selection (DSS) Button • System Programming - Installation Manual [009] Extension Number Assignment [604] Extension Name Setting 3-74 Telephone Features