Panasonic KX-TA30830 KXTA308 User Guide - Page 27
LED Indication, Flashing light patterns, LED Indication on the INTERCOM Button, BLF on DSS Button
UPC - 037988850723
View all Panasonic KX-TA30830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1.1 Configuration LED Indication The Light Emitting Diode (LED) buttons indicate the line conditions with lighting patterns. Flashing light patterns Flashing slowly (60 flash/min) Flashing moderately (120 flash/min) Flashing rapidly (240 flash/min) 1 s LED Indication on the INTERCOM Button The table below shows the lighting patterns for intercom line conditions. INTERCOM Button Off Green On Flashing Green Slowly Flashing Green Moderately Flashing Green Rapidly Intercom Line Condition Idle Intercom call / Conference established Intercom call hold Intercom call exclusive hold Incoming intercom/doorphone call LED Indication on the CO Button The table below shows the lighting patterns for outside (CO) line conditions. CO Button Outside (CO) Line Condition Off Green On Flashing Green Slowly Flashing Green Moderately Flashing Red Rapidly Red On Flashing Red Slowly Flashing Red Moderately Idle You are using the line. You have a held call or Hold Recall You have one of the following: (1) exclusive hold, (2) outside-to-outside (CO-toCO) line call, or (3) Conference, Unattended. Incoming call Other-use Other-hold* Local Carrier-Based Voice Mail Service* BLF on DSS Button - Item with an * is only available on a Single-CO button. The Busy Lamp Field (BLF) indicator button is red when the corresponding extension is busy. This is available for Flexible CO buttons assigned as DSS buttons on proprietary telephones. PT Overview 1-15