Panasonic KX-TA30830 KXTA308 User Guide - Page 71

3.2 Telephone Features C Call Forwarding - to an Outside (CO) Line You can forward calls to an external party. System programming is required to execute this feature. Setting PT and SLT FWD/DND For a PT 3 7 1 For an SLT line access code phone no. Lift the handset For a PT: Press FWD/DND. or press For an SLT: Dial 71. SP-PHONE/MONITOR. Dial 3. Enter the line Enter the Dial #. Confirmation access code phone number. tone and (9 or 81 through 83). dial tone Hang up or press SP-PHONE/MONITOR. • When you dial line access code "9": FWD(All) All COs • When you dial line access code "81 through 83": FWD(All) CO Gx outside (CO) line group number • The FWD/DND indicator flashes red slowly. Conditions • If an incoming outside call is forwarded to an outside (CO) line, the "Outside-toOutside (CO-to-CO) Line Call Duration Time" is applied to the call and the line will be disconnected when it expires (default: 10 minutes). An alarm tone is sent to both parties fifteen seconds before the assigned duration time limit. • Up to thirty-two digits (including the line access code) can be programmed. • If a CPC signal is sent to an outside (CO) line before the assigned duration time limit, a call between two external parties will be disconnected. • This feature cannot be used for incoming outside calls from lines assigned as "Normal", by System Programming. • An account code must be entered by pressing " " and entering the account code after the line access code in the account code verify-all and forced modes. Programming References • System Programming - Installation Manual [205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit [414]-[416] Outside (CO) Line Mode - Day/Night/Lunch [605] Account Code Entry Mode [607] Call Forwarding to an Outside (CO) Line Telephone Features 3-17