Panasonic KX-TA30830 KXTA308 User Guide - Page 97

3.2 Telephone Features C Call Transfer - to an Outside (CO) Line Allows you to transfer a received call to an external party. PT During a conversation TRANSFER CO line access code phone no. Press Confirmation tone TRANSFER. and dial tone Press a CO or enter a line access code (9 or 81 through 83). Enter the phone number Wait for Announce. Hang up or where the call will be an answer. press transferred. SP-PHONE. • The current call is placed on hold. • The call is transferred. Conditions PT • If a CPC signal is sent to an outside (CO) line before the assigned time limit, a call between two external parties will be disconnected. PT • System programming is required to execute this feature. PT • If a call between two external parties is established, an alarm tone is sent to both parties fifteen seconds before the assigned time limit (default: 10 minutes). "Hold Alarm/Hold Recall" is sent to the transferring extension fifty seconds before the timeout. PT • If you want to return to the held call, press the TRANSFER button or corresponding CO or INTERCOM button before the destination party answers. PT • If you want to join the conversation after transferring the call, press the corresponding CO button. A conference call is established. PT • To change the party where the call is transferred before hanging-up, press the CO button whose indicator is flashing slowly to retrieve the call, then repeat the Call Transfer procedure. Programming References • System Programming - Installation Manual [205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit [420] Calling Party Control (CPC) Signal [606] Call Transfer to an Outside (CO) Line Feature References Conference Hold Alarm/Hold Recall (→ See the Installation Manual.) Telephone Features 3-43